Cleaning The Rs 160 - Sennheiser RS 160 Instruction Manual

Cleaning the RS 160

CAUTION Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a
short-circuit and damage the electronics.
Keep all liquids far away from the product.
Do not use any cleansing agents or solvents.
Before cleaning, switch the product off and disconnect the transmitter
from the mains.
Only use a dry and soft cloth to clean the product.
Replacing the ear pads
For reasons of hygiene, you should replace the earpads from time to time.
Spare earpads are available from your Sennheiser dealer (see "Accessoires
and spare parts" on page 30).
·
Remove the ear pads from the ear cups by turning the ear pads in
the direction of the arrow until you overcome a slight resistance.
·
Lift the ear pads off the ear cups.
·
Secure the new ear pads to the ear cups.
Cleaning the RS 160
·
27