Cleaning And Maintaining The Rs 175; Replacing The Ear Pads - Sennheiser RS 175 Instruction Manual

Cleaning and maintaining the RS 175

26 | RS 175
Cleaning and maintaining the RS 175
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit and
damage the electronics.
Keep all liquids away from the product.
Do not use any cleansing agents or solvents.
To clean the wireless headphone system:
Switch your wireless headphone system off and disconnect the trans-
mitter from the AC wall outlet before cleaning.
Clean the product only with a soft, dry cloth.

Replacing the ear pads

For reasons of hygiene, you should replace the ear pads from time to time.
Spare ear pads are available at your local Sennheiser partner.
1 Lightly twist the ear pads counterclockwise until you overcome a slight
resistance.
2 Lift the ear pads off the ear cups and dispose of them properly.
3 Hook the new ear pads onto the ear cups. Observe the
R (right) markings on the rear of the ear pads.
4 Twist the ear pads clockwise until you hear a click sound. Ensure that
they are locked firmly onto the ear cups.
L (left) and