Using The Rs 160; Switching The Transmitter On And Off - Sennheiser RS 160 Instruction Manual

Using the RS 160

1s
5s
18
Using the RS 160
To switch the product on and to listen to your sound source, proceed as
follows:
Sequence of steps
1. Make sure that the rechargeable batteries are charged.
2. Switch your sound source on.
3. Switch your transmitter on.
4. Switch your headphones on.
5. Adjust the desired volume.

Switching the transmitter on and off

Switching the transmitter on
Press the multi-function button
The transmitter switches on. The multi-function LED
indicating that the transmitter is in enrollment mode.
Once the transmitter has found suitable headphones, it pairs with the
headphones and transmits an audio signal. The multi-function LED
of the headphones and the multi-function LED
flash slowly.
1
2
Page
16
–
18
20
21
for approx. 1 second.
flashes green,
of the transmitter
º
º