Cleaning And Maintaining The Rs 185; Replacing The Ear Pads - Sennheiser RS185 Instruction Manual

Cleaning and maintaining the RS 185

Cleaning and maintaining the RS 185
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit and
damage the electronics.
Keep all liquids away from the product.
Do not use any cleansing agents or solvents.
To clean the wireless headphone system:
Switch your wireless headphone system off and disconnect the trans-
mitter from the AC wall outlet before cleaning.
Clean the product only with a soft, dry cloth.

Replacing the ear pads

For reasons of hygiene, you should replace the ear pads from time to time.
Spare ear pads are available at your local Sennheiser partner.
1 Lightly twist the ear pads counterclockwise until you overcome a slight
resistance.
2 Lift the ear pads off the ear cups and dispose of them properly.
3 Hook the new ear pads onto the ear cups. Observe the
R (right) markings on the rear of the ear pads.
4 Twist the ear pads clockwise until you hear a click sound. Ensure that
they are locked firmly onto the ear cups.
L (left) and
RS 185 | 27