Using the RS 160
22
Adjusting the signal of the sound source
The transmitter automatically ensures that the headphones always
receive an optimum signal. If necessary, use the
adjust the volume of the audio signal.
However, the signal of the sound source can be so strong that it can no
longer be automatically adjusted.
If the signal of the sound source is too strong, the multi-function LED
the transmitter flashes or lights up red.
Either adjust the
VOLUME
multi-function LED
stops flashing or lighting up red.
Or adjust the volume of your sound source so that the multi-function
LED
stops flashing or lighting up red.
5
VOLUME
control
on the transmitter so that the
2
control
to
of