Putting the RS 160 into operation
1s
14
Inserting rechargeable batteries/standard batteries into the transmitter
and changing them
Power the TR 160 transmitter either with rechargeable batteries (AA
size, NiMH, 1.2 Vat least 1,300 mAh) or standard batteries (AA size,
1.5 V).
Open the battery compartment at the base of the transmitter as
shown.
Remove the depleted rechargeable batteries or batteries (where
applies).
Insert the rechargeable batteries or batteries. Observe correct polarity.
Close the battery compartment.
The cover locks into place with an audible click and the transmitter
switches on. The multi-function LED
The transmitter is in enrollment mode.
flashes green after 9 seconds.