The RS 160 digital RF headphone system ... 4 Delivery includes ... 5 Product overview ... 6 Overview of the HDR 160 headphones ... 6 Overview of the TR 160 transmitter ... 7 Overview of the indicators and acoustic signals ... 8 Overview of the connection stages ...
• Switch the headphones off after use to conserve battery power. • The headphones contain magnets that generate a magnetic field which • Please protect your hearing from high volume levels. Sennheiser • Only use the Sennheiser supplied power supply units.
Page 4
Replacement parts When replacement parts are required, be sure the service technician uses replacement parts specified by Sennheiser or those having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Intended use Intended use of the product includes •...
Delivery includes Delivery includes 1 HDR 160 headphones 1 TR 160 transmitter 1 power supply unit with country adapters 1 stereo audio cable with 3.5 mm jack plugs 1 DC cable (4.0 mm DC jack socket to 2 x 4.0 mm DC plug) 2 AAA size NiMH rechargeable batteries, 1.2 V...
Headband ´ Ear pads ² VOLUME – Battery compartments ¶ º With the multi-function button headphones on/to standby mode, set the headphones to multi-user operation, mute the headphones and associate the headphones. º ¿ ¶ ´ ² button Multi-function button...
Overview of the TR 160 transmitter Multi-function button Multi-function LED Socket for power supply unit (DC 5V Audio input (AUDIO VOLUME control (– With the multi-function button transmitter on/to standby mode, set the transmitter to multi-user operation and associate the transmitter. Product overview 0.5A) , you can switch the...
Product overview Overview of the indicators and acoustic signals Meaning of the pictograms for the different LEDs Indicators on the headphones Status Meaning The LED is lit. The LED flashes once per second. The LED flashes twice every 5 seconds.
Page 10
Indicators on the transmitter Indicator Status Multi-function LED Acoustic signal of the headphones 1 short beep Meaning The minimum volume is reached. The maximum volume is reached. Product overview Meaning The signal of the sound source is too strong. The transmitter is in...
Single-user and multi-user operation Single-user operation You can listen to your sound source via one pair of headphones. By default, the transmitter is set to single-user operation (see page 23). Multi-user operation In order to be able to listen to your sound source with several headphones simultaneously, you have to set your transmitter to multi-user operation (see page 26).
Do not place the transmitter close to metal objects such as shelf bars, Music Photos Videos Extras Settings Shuffle Songs reinforced concrete walls, etc. as this can decrease the transmitter’s range. Make sure that there is direct line of sight between the transmitter and the headphones. Putting the RS 160 into operation...
Putting the RS 160 into operation Connecting the transmitter to a sound source You can connect the TR 160 transmitter to different sound sources, such as a TV, a DVD player or a stereo system. Switch your sound source off before connecting the transmitter. Connect the audio cable to the audio input Connect the audio cable...
The transmitter switches on. The multi-function LED after 9 seconds. The transmitter is in enrollment mode. You can also connect the charging cable the power supply unit to conveniently charge your headphones (see “Charging rechargeable batteries in the headphones” on page 16 ).
Page 15
Putting the RS 160 into operation Inserting rechargeable batteries/standard batteries into the transmitter and changing them Power the TR 160 transmitter either with rechargeable batteries (AA size, NiMH, 1.2 Vat least 1,300 mAh) or standard batteries (AA size, 1.5 V). Open the battery compartment at the base of the transmitter as shown.
For powering the headphones, you can use: • standard batteries (AAA size, 1.5 V) • rechargeable batteries (AAA size, NiMH, 1.2 V, 600 mAh) If you use rechargable batteries, you can charge them in the headphones using the charging cable (see next chapter).
Page 17
The operating time is up to 24 hours. CAUTION Danger of damage to the headphones! If standard batteries are inserted into the headphones, the batteries can leak during charging and damage the headphones. Only charge rechargeable batteries in your headphones.
³ adjusted to properly fit your head. To do so, adjust the headband snap-in locking mechanism: Wear the headphones so that the headband your head. Adjust the length of the headband so that – your ears are completely inside the earpads, –...
The transmitter switches on. The multi-function LED indicating that the transmitter is in enrollment mode. Once the transmitter has found suitable headphones, it pairs with the headphones and transmits an audio signal. The multi-function LED of the headphones and the multi-function LED flash slowly.
Page 20
To disconnect the transmitter from the mains: Pull out the mains plug from the wall socket. If the headphones are outside the transmission range or switched off for more than 5 minutes, the transmitter automatically switches to standby mode. The multi-function LED mode, the transmitter’s power consumption is very low so that it...
Danger due to high volumes! Listening at high volume levels for long periods can lead to permanent hearing defects. Before putting the headphones on, set the volume to a low level. Do not continuously expose yourself to high volumes. ´...
Adjusting the volume on the headphones ² Press the VOLUME – button or the until the volume is adjusted to a comfortable and undistorted level. ² Vol - Vol + Muting the headphones Briefly press the multi-function button or to cancel the muting.
Using the RS 160 Adjusting the signal of the sound source The transmitter automatically ensures that the headphones always receive an optimum signal. If necessary, use the adjust the volume of the audio signal. However, the signal of the sound source can be so strong that it can no longer be automatically adjusted.
The RS 160 system features the digital wireless audio transmission technology from Kleer. You can also associate other Kleer compatible headphones (e.g. the Sennheiser MX W1) to the transmitter. For more information, refer to the chapter “Associating other Kleer compatible headphones to the transmitter” on page 25 or to the instruction manual of the corresponding product.
Page 25
Using the RS 160 After approx. 30 seconds, the headphones are paired with the transmitter and you can hear your sound source via the headphones. The multi- function LED transmitter flash green. Simultaneously press the multi-function button transmitter and the multi-function button 7 seconds.
Page 26
Associating other Kleer compatible headphones to the transmitter The following describes how to associate the Sennheiser MX W1 earphones to the TR 160 transmitter. For information on how to associate other Kleer compatible headphones to the transmitter, refer to the instruction manual of the corresponding prod- uct.
Only use a dry and soft cloth to clean the product. Replacing the ear pads For reasons of hygiene, you should replace the earpads from time to time. Spare earpads are available from your Sennheiser dealer (see “Accessoires and spare parts” on page 30). ·...
(including ESD) in the vicinity Headphones are not correctly associated with the transmitter (e.g. additional headphones) Occasional Headphones are out of sound range dropouts Signal is shielded Interfering devices in the vicinity Sound is too...
Page 30
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance. To find a Sennheiser partner in your country, search at www.sennheiser.com. If a problem occurs ...
Accessories and spare part Accessories and spare part Only use original Sennheiser accessories and spare parts, otherwise the product quality can be impaired or the product can be damaged. Cat. No. 504250 534480 534486 534479 093778 514267 534470 Accessory/spare part...
Operating time with batteries approx. 120 hours Weight (w/o batteries) approx. 56 g Dimensions 8.7 cm x 9.7 cm x 2.7 cm HDR 160 headphones Transducer principle circumaural, closed Max. SPL 106 dB (SPL) < 0.5 % at 1 kHz, 100 dB SPL Frequency response 18 Hz –...
Manufacturer declarations Manufacturer declarations Warranty Sennheiser GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. In compliance with the following requirements •...
Page 34
• Consult the dealer or an experienced radio/TV technician for help. This class B digital apparatus complies with the Canadian ICES-003. Changes or modifications made to this equipment not expressly approved by Sennheiser electronic Corp. may void the FCC authorization to operate this equipment. RF Radiation Exposure Information...
Page 35
Manufacturer declarations In compliance with: Trademarks The Kleer logo is a trademark of Kleer Inc. About ENERGY STAR ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment.
Page 36
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany Publ. 08/09...