Table of Contents
Advertisement
12 Using the CD-ROM
•
It is possible to change the "List of camera-related device" display between IPv4 addresses and
IPv6 addresses in accordance with the protocol in use.
•
The information displayed can be sorted by clicking the title of each displayed item.
•
When the [Network Settings] button is clicked, the "Network Settings" screen is displayed and
network settings can be changed. For further information, refer to page 66.
•
Click the [Search] button to display the latest information.
3.
When the plugin software "Network Microphone Plugin" installation screen is displayed, follow the
on-screen instructions to install the software. (The plugin software "Network Microphone Plugin" is installed
from the microphone.)
•
The "Live" page of the microphone is displayed.
•
If the plugin software "Network Microphone Plugin" cannot be installed or live images are not displayed,
click the [Install] button next to [Plug-in software] from the CD launcher window to install the software.
Changing Network Settings
When changing settings related to the network settings, such as connection mode, IP address, and subnet
mask, click the [Network Settings] button in [IP Setting Software] screen.
The "Network Settings" screen is displayed. Enter each item and then click the [Save] button.
Note
•
By unchecking the "Wait for device restarting." checkbox, multiple microphones can be
continuously configured.
•
For further information about each setting of the "Network Settings" page, refer to page 32.
66
Operating Instructions
Advertisement
Table of Contents
