Table of Contents
Advertisement
10 Configuring the network settings [Network]
Refer to page 55 for information on how to configure the settings relating to DDNS.
[Service]
Select the DDNS service to determine whether or not to use DDNS.
•
Off: Does not use the DDNS function.
•
Dynamic DNS Update: Uses Dynamic DNS Update (RFC2136 compliant) without the DHCP cooperation.
•
Dynamic DNS Update(DHCP): Uses Dynamic DNS Update (RFC2136 compliant) with the DHCP
cooperation.
•
Default: Off
Note
•
When using Dynamic DNS Update (RFC2136 compliant), refer to the network administrator for whether
or not to cooperate with the DHCP.
10.2.5 Configure the settings relating to SNMP
The settings relating to SNMP can be configured on this page. It is possible to check the status of the
microphone by connecting to the SNMP manager. When using the SNMP function, contact the network
administrator.
[Community]
Enter the community name to be monitored.
•
Available number of characters: 0 - 32 characters
•
Default: None (blank)
IMPORTANT
•
When using the SNMP function, it is necessary to enter the community name. When no community
name is entered, the SNMP function will not work.
[System name]
Enter a system name to be used to manage the microphone with the SNMP function.
40
Operating Instructions
Advertisement
Table of Contents
