Table of Contents
Advertisement
7 Register a camera for the "Live" page [Camera reg.]
7 Register a camera for the "Live" page
[Camera reg.]
The camera images to be displayed on the "Live" page of the unit can be specified on the "Camera reg." page.
(®page 14, page 15)
[Camera image format]
Select from JPEG or H.264 for the camera image to be displayed.
When H.264 is selected, select the stream number using "Stream".
[IP address]
Enter the IP address of the camera to be registered.
Note
•
Specify the IPv4 address of the camera.
•
When the setting on the camera side is an HTTPS connection, enter the IP address in the "https://IP
address" format.
•
When only the IP address is configured, the camera is accessed via HTTPS or HTTP and the camera
image is displayed depending on the connection setting (®page 48).
[Port number]
Enter the connection port number of the camera to be registered.
[Set] button
Register the setting details on this page.
[Delete] button
Delete the currently displayed registration.
Note
•
The unit supports the following Panasonic 360° camera images.
–
Fisheye images
–
Panorama images
–
Quad PTZ images
–
Single PTZ images
•
When an unsupported camera or image is specified, sound that has directionality cannot be heard.
Check the following.
–
The registered camera is a 360° camera
–
The image of the 360° camera is a fisheye, panorama, quad PTZ, or single PTZ image
24
Operating Instructions
Advertisement
Table of Contents
