Table of Contents
Advertisement
11 Maintenance of the microphone [Maintenance]
11.4 Reset the settings/Reboot the microphone
[Default reset]
Click the [Default reset] tab of the "Maintenance" page. (®page 14, page 15)
The settings and reboot of the microphone can be performed on this page.
[Reset to the default (Except the network settings)]
Click the [Execute] button to reset the settings to the default. Note that the network settings will not be reset.
It is impossible to operate the microphone for about 3 minutes after the initialization.
[Reboot]
Click the [Execute] button to reboot the microphone. It is impossible to operate the microphone for about 3
minutes after rebooting the microphone.
Note
•
To initialize the network settings (®page 32), turn off the power of the microphone, then turn on the
power again while holding down the INITIAL SET button on the microphone, and keep the INITIAL
SET button held down for about 5 seconds. Wait about 3 minutes after releasing the button. The
microphone will start up and the settings including the network settings will be initialized. Do not turn
off the power of the microphone for about 3 minutes after turning on the power.
11.5 Settings data/backing up or restoring logs
[Data]
Click the [Data] tab of the "Maintenance" page. (®page 14, page 15)
60
Operating Instructions
Advertisement
Table of Contents
