Table of Contents
Advertisement
9 Configure the settings relating to the authentication [User mng.]
9 Configure the settings relating to the
authentication [User mng.]
The settings relating to authentications and restrictions for users and PCs accessing the microphone with a
PC can be configured on the "User mng." page.
The "User mng." page has 3 tabs; the [User auth.] tab, the [Host auth.] tab, and the [System] tab.
9.1 Configure the settings relating to the user
authentication [User auth.]
Click the [User auth.] tab on the "User mng." page. (®page 14, page 15)
The settings relating to the authentication of users who can access this microphone from the PC can be
configured on this page. Up to 24 users can be registered.
Note
•
When user authentication has failed (authentication error) 8 times within 30 seconds using the same
IP address (PC), access to the microphone will be denied for a while.
[User auth.]
Select "On" or "Off" to determine whether or not to authenticate the users.
•
Default: Off
[Authentication]
Set the user authentication method.
Digest or Basic: Uses Digest or Basic authentication.
Digest: Uses Digest authentication.
Basic: Uses Basic authentication.
•
Default: Digest or Basic
28
Operating Instructions
Advertisement
Table of Contents
