Table of Contents
Advertisement
Destination of notification
[Address 1] - [Address 4]
Enter the destination IP address or host name of the Panasonic alarm protocol. Up to 4 destination server
addresses can be registered.
To delete the registered destination server address, click the [Delete] button respective to the desired
destination server address.
IMPORTANT
•
When entering the host name of the "Destination server address", the DNS settings on the [Network]
tab of the "Network" page must be configured. (®page 32)
•
Confirm that the destination IP addresses are registered correctly. When a registered destination does
not exist, notifications may be delayed or not be received.
8 Configure the malfunction notification settings [Failure Notif.]
Operating Instructions
27
Advertisement
Table of Contents
