Low Power Mode
Parameter # 80h
This parameter determines whether or not the digital scanner enters low power mode after a decode attempt.
If disabled, power remains on after each decode attempt.
*
Disable Low Power Mode
(00h)
Time Delay to Low Power Mode
Parameter # 92h
NOTE This parameter only applies when Low Power Mode is enabled.
This parameter sets the time the digital scanner remains active before entering low power mode. The digital
scanner wakes upon trigger pull or when the host attempts to communicate with the digital scanner.
1 Second
(11h)
1 Minute
(21h)
User Preferences & Miscellaneous Digital Scanner Options
Enable Low Power Mode
(01h)
10 Seconds
(1Ah)
4 - 9