Motorola DS4208 Product Reference Manual page 28

Table 2-1
Beeper Definitions (Continued)
Beeper Sequence
3 long high beeps
High/low/high beeps
Low/high beeps
Macro PDF
2 low beeps
2 long low beeps
3 long low beeps
4 long low beeps
5 long low beeps
Low/high beeps
Fast warble beep
Host Specific
USB only
Low/medium/high beeps
upon scanning a USB device
type
Low/medium/high beeps
occur more than once
RS-232 only
1 short high beep
Code 39 buffer is full.
The Code 39 buffer was erased.
A successful transmission of buffered data.
MPDF sequence buffered.
File ID error. A bar code not in the current MPDF sequence was scanned.
Out of memory. There is not enough buffer space to store the current MPDF
symbol.
Bad symbology. Scanned a 1D or 2D bar code in a MPDF sequence, a duplicate
MPDF label, a label in an incorrect order, or trying to transmit an empty or illegal
MPDF field.
Flushing MPDF buffer.
Flushing an already empty MPDF buffer.
Aborting MPDF sequence.
Communication with the host must be established before the digital scanner can
operate at the highest power level.
The USB host can put the digital scanner in a state where power to the scanner is
cycled on and off more than once. This is normal and usually happens when the
PC cold boots.
A <BEL> character is received and Beep on <BEL> is enabled.
Indication
Scanning 2 - 3