Rs-232 Parameter Defaults - Motorola DS4208 Product Reference Manual

RS-232 Parameter Defaults

Table 6-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s)
provided in the RS-232 Host Parameters section beginning on page 6-4.
NOTE See
miscellaneous default parameters.
Table 6-1
RS-232 Host Default Table
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Parity Type
Data Bits
Stop Bits
Check Receive Errors
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
Note: The DS4208 supports one stop bit only.
Appendix A, Standard Default Parameters
Parameter
for all user preferences, hosts, symbologies, and
Default
Standard 6-6
9600 6-8
None 6-9
8-Bit 6-10
1 Stop Bit 6-10
Enable 6-11
None 6-11
None 6-13
2 Sec 6-15
Low RTS 6-16
Disable 6-16
0 msec 6-17
Normal Operation 6-18
Send Bar Code 6-18
RS-232 Interface
Page
Number
6 - 3