Connecting A Tethered Scanner - Honeywell MX9 User Manual

Connecting a Tethered Scanner

1. Squeeze the I/O port connector latches inwards. Connect part (1) of the RS232 cable to the I/O port at the base of the
MX9. Release the connector latches and test the connection for stability.
2. Match the shape of the serial port (2) on the RS232 cable with the shape of the tethered scanner cable end.
3. Press the ends firmly together.
4. Secure the connection by tightening the thumbscrews on the tethered scanner cable end until they are finger tight.
1. Connect to I/O port
2. Connect to tethered scanner
3-13