Connecting The Usb Client And Power Cable - Honeywell MX9 User Manual

Connecting the USB Client and Power Cable

Note: AC/DC Adapter must be assembled before this process begins.
Note: Do not connect AC power to the AC Adapter yet.
1. Holding the cable I/O connector (1), pinch the catch release buttons in until the catches are open. Connect the cable to
the MX9 I/O port by matching the shape of the I/O connector on the cable with the shape of the I/O connector at the
base of the MX9. Release the catch release buttons.
2. Insert the AC adapter single pin cable (2) .
3. Connect the AC Adapter to a power source (wall outlet).
4. Insert the USB client plug (3) into the target USB Client port.
The MX9 and the USB client are connected.
3-2