Chapter 3: Connecting Cables To The Mx9; Connecting The Usb Host And Power Cable - Honeywell MX9 User Manual

Chapter 3: Connecting Cables to the MX9

Note: Do not connect or disconnect cables in a Hazardous location.

Connecting the USB Host and Power Cable

Note: AC/DC Adapter must be assembled before this process begins.
Note: Do not connect AC power to the AC Adapter yet.
1. Holding the cable I/O connector (1), pinch the catch release buttons in until the catches are open. Connect the cable to
the MX9 I/O port by matching the shape of the I/O connector on the cable with the shape of the I/O connector at the
base of the MX9. Release the catch release buttons.
2. Insert the AC adapter single pin cable (2).
3. Connect the AC Adapter to a power source (wall outlet).
4. Insert the USB host plug (3) into the USB Host port.
The MX9 and the host device are connected.
3-1