Vehicle 12V Bare Wire Adapter; Vehicle Cable Connection Cable (Fuse Not Shown) - Honeywell MX7 Reference Manual

Vehicle 12V Bare Wire Adapter

Part Number: 9000A079CBL12ML3
Caution: For proper and safe installation, the input power cable must be connected to a fused circuit on the vehicle. This
fused circuit requires a ten Amp maximum time delay (slow blow) high interrupting rating fuse. If the supply
connection is made directly to the battery, the fuse should be installed in the positive lead within 5 inches of the
battery positive (+) terminal. Note: For North America, a UL Listed fuse is to be used.
Caution:
For installation by trained service personnel only.

Vehicle Cable Connection Cable (Fuse Not Shown)

1. To Vehicle Battery
2. To Vehicle Mounted Device
3. Green (GND)
4. Brown (DC+)
5. Blue (DC-)
6. 12 VDC
4-14