MagicBox Vip User Manual page 73

First, select the "Enable Logo for all pages" checkbox. This will enable
display of the Logo Bug. By default, all pages will display your logo. If
you want certain individual pages to omit the logo, you can use the Page
Settings dialog of those pages to disable the logo.
Next, click on "Browse" to select the image file you want to use. The
image file should be small enough that it won't cause an obstruction of
your pages. If it is too large, you can use the "Scale" factor to reduce the
size of the image. Currently, only solid rectangular images are
supported. Use of transparent images, such as transparent "GIF" files is
not supported.
Most Logo Bugs are shown in the lower right corner of the screen.
However, you may select any corner for your logo. You can also adjust
the horizontal and vertical offsets from that corner, though a value of 40
is recommended so the logo will be visible on all types video monitors.
As mentioned earlier, you can enable or disable the logo from within any
page by clicking on "Page Properties" to display the Page Settings
dialog, then click on the "Logo" tab:
By removing the "Show Logo" checkbox, the logo for this page will be
omitted.
VIP User Manual 69