Fcc Statement - MagicBox Vip User Manual

The licensed software and all associated documentation, and all proprietary and intellectual property rights
therein, are and shall remain the exclusive property of MagicBox Inc. Licensee agrees not to (a) modify, adapt,
alter, translate, or create derivative works from the licensed software or associated documentation, except as
expressly permitted; (b) reverse engineer, de-compile, dissemble or un-assemble in any way the licensed software;
or (c) distribute or disclose to others the licensed software or associated documentation.
MISCELLANEOUS
This agreement represents the entire understanding regarding the programs and related documentation and
supersedes any prior purchase order, communications, or representations. MagicBox, Inc. products and services
are interoperable only with specific 3
without limitation at MagicBox, Inc.'s discretion, and may be changed without notice at any time.
MagicBox Inc. for a list of approved 3
only be modified by an officer of MagicBox, Inc. If any provision of the agreement shall be deemed unlawful, void,
or for any reason unenforceable, it shall be deemed severable from, and shall in no way affect the validity and
enforceability of the remaining provisions of the agreement.
This license agreement shall be governed by the laws of the state of Oregon.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed in
accordance with the instructions in this manual, harmful interference to radio communication may occur.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause interference to radio and television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try and correct the interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the space between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from the one to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional
suggestions. The user may find the following booklet prepared by the Federal Communications Commission
helpful: "How to Identify and Resolve Radio-TV Interference Problems". This booklet is available from the U.S.
Government Printing Office, Washington, DC 20402 by ordering Stock No. 004-00000345-4.
A shielded-type power cord is required in order to meet the FCC emission limits and also to prevent interference to
the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only
shielded cables to connect I/O devices to this equipment.
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out
in the Radio Interference Regulation of the Canadian Department of Communications. "Le présent appareil
numérique n'èmet pas de bruits radioélectroniques dépassant les limites applicable aux apparils numéeriques de las
class B prescrites dan le Règlement sur le brouillage radioélectrique édicté par le ministrère des Communications
du Canada."
6
party products and services, the definition of which is reserved solely and
rd
party vendor products, services and/or limitations. This agreement may
rd
Federal Communications Commission
(FCC Statement)
WARNING:
Canadian Doc Notice
For Class B Computing Devices
Contact
VIP User Manual