Table of Contents
Advertisement
Show/Hide Time Overlay
Selecting "Show Time Overlay" will display the current time in the
lower right hand corner of the screen. By selecting "Hide Time
Overlay", the time will not be displayed.
**Dwell times for pages to display the time must have a minimum of
Time / Date
The VIP unit uses the current time and date to determine when to
display pages from your project.
Setting the Date
A 6-digit digital display showing the current Month, Day, and Year
will appear. Use the left and right arrow buttons to select which
digit you wish to modify, and use the up and down arrow buttons to
change the value of that digit. To enter years greater than 1999, use
"00" for 2000, "01" for 2001, etc.
Once you have adjusted the digits to reflect the current date, use the
arrow buttons to highlight "Set" and press Select ( ). You will be
returned to the Setup Screen.
It is important to set the date and time because the VIP
unit uses this information to determine when to play
certain pages that you have created. When you create
pages on your PC, you can set starting and ending dates
and times.
30
4
seconds**
VIP User Manual
Advertisement
Table of Contents
