Network Setup - MagicBox Vip User Manual

Selecting any of these settings will change the VIP output to that display
resolution. Any graphics created in modes greater than the one you have set
will be scaled down to fit the current display resolution. This may cause an
apparent decrease in image quality or change in overall proportion.
If you attempt to display an image that is a smaller resolution than the
current display, the image will appear smaller, surrounded by a black
boarder.

Network Setup

The only way to publish to a VIP is via the network.
Ethernet networking can be a complex subject. If you are
not familiar with the meaning and implementation of
terms like "TCP/IP", "IP Address", "Subnet Mask", etc.,
then it is recommended that you have your network
administrator assist you with these menus.
All network settings are adjusted by
selecting the "Network" menu from
the setup screen:
Set the Network Address
From the Setup Screen, select "Network" and then select
"TCP/IP". The following display should appear:
This address causes the VIP to use a DHCP server. With this
setting, the VIP will automatically be assigned an IP address
by the network.
26 VIP User Manual