View the Demo Project
Once you've connected a monitor to your VIP unit and have applied
power, you should see one of the menu screens on your unit, such as the
one shown here:
At this point, wait for the auto project load to occur (about 5 seconds) or
press 'enter' on the disk icon. The unit should change to a "gallery"
screen like the one shown below (the individual images may vary), and
you will see each page being loaded from the hard drive. (Do not press
any buttons on the keypad or upload any projects during the loading
procedure – this will interrupt the unit.)
Once all of the demo pages have been loaded, they will begin playing
automatically. If you have successfully reached this stage, your unit is
ready to go into service. Be sure to follow the steps under "Configure
the VIP Unit", on the next page.
14
VIP User Manual