Table of Contents
Advertisement
Dwell Time
This is how many seconds your page will be displayed
by the player before the next page is displayed. A
typical dwell time would be ten to twenty seconds.
Note, however, that this dwell time is filled in as zero.
Entering just a zero tells the player to display this page
for the "Default" dwell for your project. Normally, this
default is 15 seconds, but you can edit it to be anything
you want, and all of the pages that are set to use the
default dwell will automatically change. This is
described further under "Project Properties" later in this
chapter.
For now, practice editing the dwell value by changing it
from "0" to read 5 seconds.
Transition Style
As each new page is displayed by the player, it can
appear to "wipe" onto the screen using several different
methods. The Transition Style pull-down menu allows
you to select from these different methods.
To make a page appear as fast as possible, use the "Fast
Cut" transition style.
Transition Speed
The Transition Speed determines how fast a page
appears to wipe onto the screen when played. A "Fast"
transition takes about one to two seconds, depending on
the style. A "Slow" transition takes three to five
seconds.
If you are using the "Fast Cut" transition, the speed is
ignored.
62
VIP User Manual
Advertisement
Table of Contents
