Table of Contents
Advertisement
Player Unit Capabilities
Ethernet Networking
The VIP uses the Ethernet port and built-in network software to
receive all images for projects. This must be done over a corporate
LAN or even the Internet when properly configured.
Ethernet networking can be a complex subject. If you are
not familiar with terms such as "TCP/IP", "IP Address",
"Subnet Mask", etc., then it is recommended that you have
your Network Administrator assist you with the initial
setup of the VIP unit.
The Network Protocol used on the VIP supports both Static IP
addressing or dynamic IP addressing via a DHCP server. The
default is to use DHCP (see Network Setup on page 28 for changing
this setting.)
Important Considerations
Please keep the following issues in mind when setting up and operating the
VIP playback unit.
Protect the unit from power loss.
It is always important to protect the VIP unit from power loss or power
surges. However, in the event of a power loss, the VIP unit is programmed
to turn back on when power is restored and reload the current images.
18
V
I
P
U
n
i
t
V
I
P
U
n
i
t
R
e
f
e
r
e
n
R
e
f
e
r
e
n
c
e
c
e
VIP User Manual
Advertisement
Table of Contents
