Operation; Rapid Ignition System; Controls - Miele KM 2256 Operating And Installation Instructions

Operation

Rapid ignition system

Controls

Standard and high-speed burners
Wok burner
18
The appliance is supplied with a rapid ignition system with
the following features:
– After the flame is ignited, the cooktop control can be
released immediately.
– Automatic re-ignition
Should the flame be extinguished, e. g. by a gust of air, the
burner will re-ignite automatically.
If re-ignition is unsuccessful, the gas supply will be cut off
automatically (see "Safety cut-off").
The controls are used to switch on the burners and regulate
the strength of the flame.
ß The gas supply is turned off
& Strongest flame
/ Weakest flame
ß The gas supply is turned off
& Strongest flame:
The inner and outer burners operate at the highest setting
& Strong flame (7 o'clock position):
The outer burner operates at the lowest setting,
the inner burner at the highest setting
& Strong flame (5 o'clock position):
The outer burner is switched off,
the inner burner operates at the highest setting
/ Weakest flame:
The outer burner is switched off,
the inner burner operates at the lowest setting