Table of Contents
Advertisement
KM 2256
Installation
^ Make the worktop cut-out following
the dimensions applicable.
Remember to maintain the minimum
safety distances (See "Safety
clearances".
^ Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
^ Feed the connection cable down
through the cut-out.
^ Place the cooktop in the cut-out
without securing it.
If the seals on the corners of the
frame are not flush with the worktop
surface, the corner radius (ß R4) can
be carefully scribed to fit.
^ Connect the cooktop to the mains
(see "Electrical connection").
^ Connect the appliance to the gas
supply (see "Gas connection").
^ Secure the appliance at the back and
front using the fixings supplied. See
"Securing the appliance".
36
Hide quick links:
Advertisement
Table of Contents
