Recon MOD Live User Manual page 8

Check The Remote Controller
For more information about caring and handling, see the section, Remote Care,
later in this guide.
Page 8
Although MOD live is factory-paired (synchronized) with the remote
controller shipped in the box, follow these instructions to check
that the remote is "paired" with MOD Live.
• On MOD Live, press down the power button for 3 seconds.
• On the remote controller, press any button and wait for a blue
light to flash. This confirms the remote is connected to MOD
Live.
• Hold the goggles to your eyes and check the status bar on the
display. The remote status indicator icon on the left-hand side
should be blue.
MOD Live User Manual | Version 1.1 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com