Recon MOD Live User Manual page 7

Charge Up Mod Live
NOTE: In optimal conditions, MOD Live can achieve a fast charge (80% of battery) using
your computer or AC adapter in 1 hour. MOD Live can be fully charged in 3 hours. For more
information, see the section BATTERY CARE, later in this guide.
Page 7
1. Make sure MOD Live is turned off before you start.
2. Turn on your PC or Mac. Make sure the computer is not in
standby mode.
3. Find the MOD Live power button located next to the micro USB
port. Hold down the power button for 3 seconds.
4. Plug the micro USB cable's smaller end into MOD Live's micro
USB port.
5. Plug the USB cable's larger end into the USB port in your PC
or Mac. When MOD Live begins charging, a red light appears
directly above the USB port.
6. Wait for the red light to disappear.
7. Navigate to "safely remove or eject the hardware" using your
PC or Mac before you disconnect the USB cable from MOD Live.
8. Disconnect the adapter.
9. Remove the USB cable and seal the micro USB tightly. Use the
plastic USB port cover to ensure the port is protected from rain,
snow and ice.
MOD Live User Manual | Version 1.1 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com