Unpairing The Remote - Recon MOD Live User Manual

Remote
Page 67
CHECKINg WHICH REMOTE IS PAIRED WITH YOUR UNIT
• Press the left or right button on the remote.
• Check MOD Live's display to see if it responds. Note that
the remote controller status indicator should be blue.

UNPAIRING THE REMOTE

Follow these steps when you intend to use your remote
controller with a different RECON product or you are returning
the MOD unit or the remote.
To unpair the remote from MOD Live:
• Hold down the MOD power button for 3 seconds.
• On the remote, press the right and left buttons at the same
time and hold them both until an orange light flashes on
the remote.
MOD Live User Manual | Version 1.1 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com