Performing A Factory Reset - Recon MOD Live User Manual

Performing a Factory Reset
Perform a reset if any app seems frozen,
missing from the display, if you can't get a
GPS fix even after restarting.
WARNING: A factory reset clears all data
that MOD Live has recorded, unpairs the
remote controller, clears your settings,
uninstalls any third-party apps, and restores
MOD Live back to the default settings it was
shipped with.
Page 62 MOD Live User Manual | Version 1.1 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com
How to perform a reset:
1. Hold down the MOD Live power button
and wait until the blue power light and
red battery charging light blink.
2. When the red LED starts to flash quickly,
let go of the power button.
3. Hold down the power button until both
red and blue LED lights blink in unison.
Let go.
4. Hold down the power button for another
second.
NOTE: You need to re-pair your remote
controller with MOD Live after each reset.
See the section on repair instructions.