Recon MOD Live User Manual page 56

MOD Live FAQ
MOD LIVE DATA
Why are my statistics wrong?
MOD Live uses GPS technology to determine statistics. Your location affects the GPS coverage,
for example, being in a valley, beside a tree, building or rock face.
Steps to take:
1. Move to an open location with a clear view of the sky. If you are in a valley or gulley, move to
higher ground.
2. Reset statistics by navigating to the Preferences menu, choosing RESET STATS and then
choosing YES at the prompt to save and reset.
Why does the clock show the wrong time?
MOD Live shuts off the clock when the battery level is almost drained. When you first use MOD
LIVE, the clock shows Greenwich Time. You need to set the clock for your own time zone.
Step to take:
1. To reset the time, see Preferences section earlier in this guide.
Why is my temperature data higher than it should be?
The temperature sensor is contained in the remote controller, not in MOD Live. If you are
wearing the remote controller inside a pocket, jacket, cuff or backpack, the temperature will be
a few degrees higher. If the remote controller is worn close to your body, the temperature will be
affected by your body heat.
Steps to take:
1. Wear the remote on your wrist, goggle outside your jacket instead of
keeping in an inside pocket.
2. Wait a few minutes for MOD Live's temperature sensor to adjust.
Page 56 MOD Live User Manual | Version 1.1 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com