Attach A Strap - Recon MOD Live User Manual

Attach A Strap
Page 10 MOD Live User Manual | Version 1.1 | © 2012 Recon Instruments Inc | All rights reserved | www.reconinstruments.com
To attach the wrist strap:
1. Slip either end of the Velcro strap (rough
side facing out) into the remote's handle.
Tip: insert the strap at a diagonal, and either
pull or push it through the handle.
2. Align the "V" of the Velcro strap with the
edge of the controller. Push down until you
hear a click.
3. Stretch the strap and insert the other end of
the Velcro strap repeating steps 1 and 2.
4. Attach Velcro around the cuff of your glove
or jacket and pull it for a snug fit. Or, use the
strap on a jacket belt or backpack.