Table of Contents
Advertisement
Operating the Pump Start/Master Valve
When in the automatic mode, the Pump Start/Master Valve is auto-
matically activated when a valve station is turned on. You can manu-
ally turn on the Pump Start/Master Valve by pressing "99" "Valve
On". IF YOU MANUALLY TURN ON THE PUMP START/MASTER
VALVE STATION, YOU MUST MANUALLY TURN IT OFF AGAIN.
There is no default time with this function. The Pump Start/MV will
stay on until "0" "Valve Off" or "99" "Valve Off" command is received.
Press the two digits "99" "Valve On" to select only the Pump Start/
Master Valve station. To turn off the pump start/master valve station
press the two digit "99" "Valve Off" key to deactivate.
To turn Master Valve off:
To turn Master Valve on:
Receiver Number
The TRC Commander Transmitter can operate as many as 199
Permanent Receivers on each group code. To designate
Receiver press a desired Receiver number and "Rec #" key.
Setting to Receiver number 3:
800-275-8558 www.remotecontroltech.com
9
9
9
9
3
REC
#
VALVE
OFF
VALVE
ON
11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the UNIVERSAL IRRIGATION REMOTE CONTROL and is the answer not in the manual?
Questions and answers