Advertisement
1 Secure the climate control into the
radio housing using the factory hard-
ware. (Figure A)
2 Secure the accessory socket panel to
the radio housing using the factory
hardware. (Figure B)
3 Clip the passenger air bag light and
the switch panel blank plates in to
the radio housing. (Figure C)
4 Attach Top and Middle Radio Housing
Clips to the back of the radio housing.
(Figure D,E)
NOTE: When the clips are properly
attached they should be on a 90
degree angle with the radio housing.
(Figure E)
Continue to kit assembly.
SIDE VIEW
FRONT VIEW
D
(2) TOP CLIPS
E
99-5816 KIT ASSEMBL Y
KIT PREPARATION
SIDE VIEW
FRONT VIEW
(4) MIDDLE CLIPS
A
B
C
3
Advertisement
