Mute Groups - Midas M32 User Manual

Digital console for live studio with 40 input channels, 32 midas microphone preamplifiers and 25 mix buses
Hide thumbs Also See for M32:
Table of Contents

Advertisement

Mute Groups

Use these buttons to select and activate one of the
user-defined Mute Groups. More detailed parame-
ters of the MUTE GROUPS section can be accessed
via the MUTE GRP screen selection button to the
right of the Main Display.
The MUTE GRP screen allows for quick assign-
ment and control of the console's six mute groups,
and offers two separate functions:
1. It mutes the active screen during the process
of assigning channels to mute groups. This
ensures that no channels are accidentally muted during the assignment process during a live performance.
2. It offers an additional interface for muting or unmuting the mute groups in addition to the dedicated mute group
buttons on the console's control surface.
When activated, the MUTE GRP screen only covers the bottom portion of the Main Display, allowing the middle portion to
continue displaying the usual screen content.
To assign channels to one of the six mute groups, perform the following steps:
1. Press the MUTE GRP screen selection button to switch the main display to the Mute Groups view.
2. Press and hold the desired mute group button on the lower right-hand side of the console's control surface.
3. While holding the mute group button, press the SEL button of any input or output channel, on any layer, that you wish
to assign to that mute group.
4. When you have assigned all of the desired channels to the mute group, release the dedicated Mute Group button. The
individual channel MUTE buttons will resume their normal functions.
To use the MUTE GRP screen to mute or unmute the groups, perform the following steps:
1. Tap any of the six rotary controls to mute the corresponding group, and thus mute all channels that are assigned to
that mute group.
2. Tap the rotary control of a currently-muted group to unmute the mute group.
3. When finished working with mute groups, tap the MUTE GRP screen selection button to exit the MUTE GRP screen.
The entire screen will again display its full set of controls for the current page.
48
www.theaudiospecialists.eu
M32 - Digital Console
User Manual
49

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M32 and is the answer not in the manual?

Questions and answers

Tumusiime Herbert
March 4, 2025

How can I power it off without interrupting the settings

1 comments:
Mr. Anderson
March 4, 2025

To power off the Midas M32 without interrupting the settings, follow these steps:

1. Ensure that all monitor loudspeaker power amplifiers are turned off or muted.
2. Switch off the M32 Control Centre before disconnecting the mains power.
3. Do not connect or disconnect the mains power while the M32 is powered on.
4. When removing the equipment’s electric plug, hold the plug itself and not the cable to avoid damage.

By following these steps, you can safely power off the M32 without affecting its settings.

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents

Save PDF