Mediant Series and TP-1610 H.323 User's Manual
2.2
TP-1610 Physical Description
The TP-1610 (shown in
capacity of up to 480 ports, supporting all necessary functions for voice, data and fax streaming
over IP networks. The TP-1610 is composed of one or two identical media gateways modules:
Gateway-1 and Gateway-2, each containing 240 DSP channels. These media gateways are fully
independent, each gateway having its own MAC (Media Access Control) and IP addresses and
LED indicators. The TP-1610 board is supplied with a rear I/O configuration in which both PSTN
trunks and Ethernet interface are located on a passive rear I/O module (for information on the
RTM, refer to Section
Figure 2-2: Front and Upper View of the TP-1610 cPCI Board
1
5
Table 2-3: Front and Upper View of the TP-1610 cPCI Board Component Descriptions
Item #
Label
1
2
ETH
3
4
5
6
T1 / E1 STATUS
7
T1 / E1 STATUS
Version 4.6
Figure
2-2) is a high-density, hot-swappable, cPCI resource board with a
2.2.2
on page 29).
2
6
T1/E1 Trunk Status LEDs (for each of trunks 1 to 8)
T1/E1 Trunk Status LEDs (for each of trunks 9 to 16)
27
3
7
Component Description
Status LEDs
Ethernet LEDs
Reset button
cPCI LEDs
cPCI Latch
2. Physical Description
4
July 2005