Ms1633 Focusbt Connection Setup - Metrologic MS1633 FocusBT Installation Manual

MS1633 FocusBT Connection Setup

25) Double-Click on the
corner of the screen.
26) The new connection wizard will automatically start.
Power up
the FocusBT scanner and allow it to boot completely. Three beeps will
indicate the scanner is completely booted.
Express Mode
Select
© Cerner Confidential and Proprietary All rights reserved. This document contains confidential information, which may not be
reproduced or transmitted without the express written consent of Cerner Corporation.
Bluetooth icon
on the Windows Start bar in the bottom right
Next
the click .
MS1633 Focus BT Scanner Installation Guide 21