MS1633 FocusBT Connection Setup (Continued)
COMReconnect
31) Locate the "
the program.
Refresh
32) Click the
FocusBT scanner to be managed. Click the
the "PortName" to select the scanner. Click
Bring up the Metrologic SoftWedge Utility by clicking the SoftWedge Icon in the Task
33)
Tray in the lower right hand side of the Desktop. This will bring up the SoftWedge Utility
window.
24
MS1633 Focus BT Scanner Installation Guide
© Cerner Confidential and Proprietary All rights reserved. This document contains confidential information, which may not be
reproduced or transmitted without the express written consent of Cerner Corporation.
" icon on the Windows desktop and double click to open
button in the lower right hand corner of the window to Display the
Box
(if not already selected) to the left of
Close
to close the window.