Metrologic MS1633 FocusBT Installation Manual page 22

MS1633 FocusBT Connection Setup (Continued)
27) A search for the Bluetooth devices should find the Focus BT scanner. The number(s)
next to FocusBT indicate the serial number of the unit(s) found.
Select the proper device and click
28) The final screen of the New Connection Wizard should indicate the virtual Bluetooth
Com port that was setup. This will usually be a high number, as seen in the screen
Remember this COM number
below.
22 MS1633 Focus BT Scanner Installation Guide
© Cerner Confidential and Proprietary All rights reserved. This document contains confidential information, which may not be
reproduced or transmitted without the express written consent of Cerner Corporation.
Next
to continue.
Next
. Click to continue.