Command/Response Table For Sis Commands - Extron electronics SW2 VGA Ars User Manual

Command/response table for SIS commands

Command
Input selection
l d o d d o input
l d o input only
l d o input only
Input video sensing
ll
E ample
:
o
Video Mute
d o
d o
d d o
Audio Mute
d o
d o
d d o
ASCII Command Response
host to switcher switcher to host
X1 ! In X1 All
X1 & In X1 Vid
X1 X1
$ In Aud
0S Sig• X2 •
0S Sig•1•1•1•0•1•0
X1 S X2
1 B/b Vmt X3
X3
0 B/b Vmt
B/b X3
X3
1 Z/z Amt
0 Z/z Amt X3
Z/z X3
Additional description
Select input
Select input
Select input
X2 •...• X2 n Each X2 response is the signal status of an input,
starting from input 1; n is the maximum number of
inputs for this model.
The input signal is present on inputs 1, 2, 3, and 5.
No signal is present on inputs 4 and 6.
X1 's signal status =
Video mute on
Video mute off
Video mute status
Audio mute on
Audio mute off
Audio mute status
X1 video and audio.
X1 video only (audio breakaway).
X1
audio only (audio breakaway).
X2 .