Table of Contents
Advertisement
There are DIP switches located on the bottom of the printer and various settings can be per-
formed as shown in the following table.
When changing the settings, use the following procedure.
(1) Turn the printer off and disconnect the power cable plug from the AC outlet.
(2) Remove the screw, and then remove the DIP switch cover on the bottom of the printer.
(3) Use a tool with a narrow tip to change the DIP switch settings.
(4) Install the DIP switch cover and secure it with the screw.
Note:The new settings will take effect after the printer is turned on.
DIP Switch 1
Switch
1-1
1-2
1-3
1-4
The factory settings of DIP Switch are all on.
11. DIP Switch Settings
Function
Always ON
Always ON
Always ON
Initializing Settings of the network
DIP switch1
OFF
ON
Valid
– 31 –
ON
OFF
Should be set to ON
Should be set to ON
Should be set to ON
Invalid
Advertisement
Table of Contents
