Table of Contents
Advertisement
10-1. General Specifications
(1) Printing method
(2) Print speed
(3) Dot density
(4) Printing width
(5) Roll paper
(6) Overall dimension
(7) Weight
(8) Noise Approx.
10. Specifications
Direct line thermal printing
Max. 1000 dots/sec. (125 mm/sec.)
203 dpi: 8 dots/mm (0.125 mm/dot)
Max. 72 mm
Refer to chapter 5 for details on the recommended roll paper.
Paper width:79.5±0.5 mm (57.5±0.5 mm when the paper roll
holder is used)
Roll diameter: ø83 mm or less
142 (W) × 204 (D) × 132 (H) mm
Auto cutter model : 1.74 kg (without roll paper)
Tear bar model : 1.58 kg (without roll paper)
49 dB (Auto cutter model)
48 dB (Tear bar model)
Note: The noise measurements listed above were obtained ac-
cording to conditions established by this company. The
noise measurements may vary depending on the type
of paper used, type of printing, operating environment,
and power consumption mode.
142 mm
– 27 –
132 mm
Advertisement
Table of Contents
