Star TSP100LAN Hardware Manual page 22

3) Paper cut error
Error Description
Paper cut error
Note: If the cutter does not return to its home position or does not perform the initial
movement, it will result in a non-recoverable error.
4) Paper detection error
Error Description
Paper out error
5) Network errors
Error Description
Network Connection
Normal
Network Not
Connected
(Physically
Disconnected)
Network Not
Connected (No IP
Address)
READY Lamp ERROR Lamp
Off Flashes at
0.125-second
intervals
READY Lamp ERROR Lamp
Flashes at
0.5-second
intervals
READY Lamp ERROR Lamp
On
Two flashes (at
0.125-second
intervals) repeated
every two seconds
Flashes at 0.125-
second intervals
Recovery Conditions
Recovered by turning the power OFF,
eliminating the cause of the error such as
jammed paper, returning the cutter to its
home position, and turning the power ON
(see 7-3).
Recovery Conditions
Automatically recovered by loading a new
paper roll, then closing the printer cover.
Status
TCP/IP
Communications
Possible
Physically
disconnected(The
Ethernet link is
down.)
Could not attain
IP address when in
DHCP/BOOTP.
When static
IP address setting
value error
– 19 –
Recovery Conditions
Check the cable and
hub/router,
then restart the power.
Check the
DHCP/BOOTP server.
Then restart the power.
Initialize the settings
using the DIP switch,
then restart with the
correct value.