Thermal Label; Paper Specifications; Recommended Paper; Printing Range - Star SM-T400I Series Hardware Manual

4.2 Thermal Label

4.2.1 Paper Specifications

Paper width :
Paper thickness : 115±15 µm
Outer diameter :
Inner diameter :
Recording side :

4.2.2 Recommended Paper

Manufacturer
RICOH
UPM

4.2.3 Printing Range

112.5 mm Paper Width
108.0 mm Label Width
2.25 mm
104.0 mm Printing Area
Surface (Label side)

4.2.4 Memory Switch Settings

When using thermal lables, set the memory switches as shown below
Manufacturer
RICOH
UPM
CAUTION
Please use Star recommended Label Paper Roll. A Label or paper roll whose end has been glued
by tape or adhesive to the core may result in the printer being unable to properly detect the end
of the paper or may cause damage to the mechanism, voiding the warranty.
112.5±0.5mm
Ø50 mm or less
Core outer diameter Min. Ø28
Outside of roll
Product Name
2.25 mm
150PSMW
DT80W
Black Mark
Print Density
Density Low
Density High
- 26 -
Black Mark
Back reading
Back reading
PCS (Print Contrast Signal)
value shall be 0.9 or more.
Liner
Back
.
( recommended )
Print Quality
High
Low
Print end
position
Cut position
Print starting
position