Temperature / Time Predetermined Level Transducer; Door Switch For The Light - Electrolux Built-in appliances Service Manual

Built-in appliances and floor-mounted stoves with „rhea“ input electronics

Table of Contents

4.1.6 Temperature / Time Predetermined Level Transducer

The temperature needed or the desired time are set by means of this component,

according to the function set at the RHEA User Interface. These parameters can be

changed from the basic position, by a 30° turn to the right and holding the turning grip in

this positive position (increasing) or by a 30° turn to the left and holding the turning grip

in this negative position (decreasing). If the predetermined level transducer is released

after the level needed and wished has been reached, it will spring back to the initial

position. The signals received will be accepted and processed by the RHEA User Inter-

face.

When opening the door of the oven, the lighting of the oven is activated over this component after

the device has been switched on. The mounting position is at the top and right-hand corner of the

front frame of the oven

Switch axis

Electrical terminals

- 25 -

599 518 252

Table of Contents

Floor-mounted stoves