Functional Parts - Cooking Setting Control; Power Controller - Electrolux Built-in appliances Service Manual

Built-in appliances and floor-mounted stoves with „rhea“ input electronics

Table of Contents

4.2

Functional parts - Cooking setting control

Fig. Power controller

Fig. Performance characteristic

K1 – Knob position

% ED – Switching on period in percent

100 % corresponds to a switching on period of 41 seconds

The hot plates are controlled via the bimetallic contact P 1-2. The input voltage of 230 V is applied

here.

Depending on the position of the knob, this contact determines how often the hot plate is switched

on or off during a certain unit of time by cycling the maximum heating power (230 V or 0 V between

contact 2 and 4) (refer to performance characteristic).

Continuous operation at max. heating power is hot plate 9.

The power characteristic shows the power controller in cycling mode.

The average switching on period for each knob position can be read off in % of the cycled and/or

max. power.

Fig. Switch in „OFF" position

Input voltage 230 V

- 27 -

599 518 252

Table of Contents

Floor-mounted stoves