Location - Rinnai RHFE752ETRN Installation Manual

Arriva 752
Hide thumbs Also See for RHFE752ETRN:
Table of Contents

Advertisement

Location

The main points governing location are flueing and warm air distribution. The Rinnai
Arriva has a cool outer casing, it can be installed into an existing masonry, or decorative
fireplace.
Enclosure dimensions
The heater must be positioned
on a flat level surface that allows
free movement of the appliance.
A pair of wheels located at the
rear of the heater allows the
unit to slide in and out of the
enclosure for commissioning
and maintenance.
In a masonry fireplace use a
slurry of sand and cement to
level the base as required.
In a decorative fireplace, when
the appliance is elevated from
the ground, construct a base
using a board with supporting
joists as pictured.
6 | Arriva 752 Installation Guide: 12218-D 04-14
h
Enclosure dimensions
W-width
H-height
D-depth
All dimensions provided are critical to the
installation of this appliance and must be
strictly adhered to.
Left and right wheels
Joist
MDF board, minimum 20 mm
w
d
850-860 mm
660-665 mm
380 mm direct flue
475 mm extended flue
500 mm underfloor flue
720
Elevated installation in a decorative fireplace
Joist

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rhfe752etrlArriva 752

Table of Contents